Illustrative equipment photography, not this model.
EG4 battery
The revised LifePower4 with a reworked BMS board and the same electrical envelope as the original. Anything true of the first version’s charge window applies here.
Published figures
Usable capacity
5.12 kWh
Capacity
100 Ah
Voltage window
44.8 to 58.4 V
Max charge current
100 A
Max discharge current
100 A
Comms
CAN, RS485
Form factor
Server rack
Units in parallel
15
Source status: Provisional figure Typical street price $900 to $1,300. Charge and discharge limits are per unit. Wiring packs in parallel raises both.
How many you need, by inverter
One pack accepts 100 amps. An inverter that can deliver more than that needs more than one, or the charge rate capped in settings. Both are valid, and the second one costs you charging speed on the short days when you need it most.
Manufacturer documentation names EG4 6000XP, EG4 18KPV, EG4 12000XP for closed-loop operation with this pack.
Where the figures come from
Manufacturer documents: EG4 product and document library. Figures here should be read against the revision that covers your serial number, because manufacturers revise specifications without changing the model name.
Where to buy the EG4 LifePower4 V2 48V 100Ah
Listings for the EG4 LifePower4 V2 48V 100Ah plus the rack hardware and cabling a clean install needs.
Affiliate links. As an Amazon Associate this site earns from qualifying purchases, at no extra cost to you. Prices and stock change often, and a listing appearing here is not a statement that the pairing above is approved.
Questions people actually ask
How many EG4 LifePower4 V2 48V 100Ah packs do I need?
One pack accepts 100 amps and holds 5.12 kWh. Match the pack count to your inverter’s charge current first, then check the energy. A Sol-Ark 15K at 275 amps would take 3 of them to charge at full rate.
Does the EG4 LifePower4 V2 48V 100Ah do closed loop communication?
