Illustrative equipment photography, not this model.
LiTime battery
Good energy per dollar and still no communication port, so state of charge comes from voltage or from a shunt you add yourself. The four unit parallel limit caps how far the bank can grow.
Published figures
Usable capacity
10.24 kWh
Capacity
200 Ah
Voltage window
40.0 to 58.4 V
Max charge current
100 A
Max discharge current
200 A
Comms
none published
Form factor
Bare case
Units in parallel
4
Source status: Provisional figure Typical street price $1,300 to $1,900. Charge and discharge limits are per unit. Wiring packs in parallel raises both.
How many you need, by inverter
One pack accepts 100 amps. An inverter that can deliver more than that needs more than one, or the charge rate capped in settings. Both are valid, and the second one costs you charging speed on the short days when you need it most.
No document tracked here names a specific inverter for closed-loop operation with this pack. That does not mean it will not work. It means nobody has published the test.
Where the figures come from
Manufacturer documents: LiTime product pages. Figures here should be read against the revision that covers your serial number, because manufacturers revise specifications without changing the model name.
Where to buy the LiTime 48V 200Ah
Listings for the LiTime 48V 200Ah plus the rack hardware and cabling a clean install needs.
Affiliate links. As an Amazon Associate this site earns from qualifying purchases, at no extra cost to you. Prices and stock change often, and a listing appearing here is not a statement that the pairing above is approved.
Questions people actually ask
How many LiTime 48V 200Ah packs do I need?
One pack accepts 100 amps and holds 10.24 kWh. Match the pack count to your inverter’s charge current first, then check the energy. A Sol-Ark 15K at 275 amps would take 3 of them to charge at full rate.
Does the LiTime 48V 200Ah do closed loop communication?
No, there is no communication port at all. Every pairing with this pack is open loop, and the inverter estimates state of charge from terminal voltage, which is unreliable through the middle of a LiFePO4 curve.
How many can I wire in parallel?
The published limit is 4 units.
Which inverters pair cleanly with the LiTime 48V 200Ah?
None of the inverters tracked here clear all four checks with this pack. Most land on unverified because nobody has published the comms or surge figure, which is a gap rather than a fault.
